linux.or.id

Hi linuxer,
saya baru di dunia linux, baru 2 minggu ini make linux, blankon 3 lontara.
sampai sekarang saya belum berhasil konek internet dg modem hp cdma.
saya pake laptop lawas: dell latitude c610, pentium III 1 Ghz, ram 256, hd 20. untuk buka aplikasi2 yg ada berjalan cukup mulus.
untuk usaha konek internet saya gunakan hp cdma nokia 2115i, kabel data ca42, keduanya sdh pernah saya gunakan di windows dan berjalan mulus.
berkali2 usaha dan upaya sdh saya lakukan, dg referensi hasil googling, namun sampai sekarang blm blm berhasil juga.
Sapa tau ada yg bisa bantu, ini skripnya setelah saya jalankan di terminal sesuai referensi yang gua dapat.

iraz@iraz-laptop:~$ sudo -i
[sudo] password for iraz:
root@iraz-laptop:~# wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2 S3
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- ERROR
ttyUSB0<*1>: Speed 4800: AT -- �[04]
ttyUSB0<*1>: Speed 4800: AT -- OK
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Speed 19200: AT -- OK
ttyUSB0<*1>: Speed 38400: AT -- OK
ttyUSB0<*1>: Speed 57600: AT -- OK
ttyUSB0<*1>: Speed 115200: AT -- OK
ttyUSB0<*1>: Speed 230400: AT -- OK
ttyUSB0<*1>: Speed 460800: AT -- [06]�
ttyUSB0<*1>: Speed 460800: AT -- [06]�
ttyUSB0<*1>: Speed 460800: AT --
ttyUSB0<*1>: Max speed is 230400; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0: Speed 230400; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
root@iraz-laptop:~# wvdial
--> WvDial: Internet dialer version 1.60
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT

--> Carrier detected. Waiting for prompt.
--> Connected, but carrier signal lost! Retrying...
--> Sending: ATDT#777
--> Waiting for carrier.

NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Disconnecting at Fri Jul 25 09:37:08 2008
root@iraz-laptop:~#

Sebetulnya modem sdh dikenali, tapi saya jalankan wvdial hasilnya seperti di atas berulang2, sementara di hpnya juga berulang2 muncul "data call ended".. Jadinya ya saya hentikan dengan CTRL+C.

wvdial.conf sendiri isinya seperti ini:

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Password = telkom
Phone = #777
Modem Type = Analog Modem
Baud = 230400
New PPPD = yes
Modem = /dev/ttyUSB0
ISDN = 0
Username = telkomnet@flexi-time
; Phone =
; Password =
; Username =

Gimana? Ada yang bisa bantu?
Mohon pencerahannya...
thanks sebelumnya...